基于Burgers体模型的采空区顶板沉降特性研究
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TD325

基金项目:

国家重点实验室项目(SKLMRDPC19KF04)


Research on Roof Settlement Characteristics of Goaf Based on Burgers Body Model
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于弹性力学理论、薄板小挠度弯曲理论及数学计算,采用Burgers体构建顶板挠度方程,研究采空区顶板不同边界条件下挠度随时间的变化关系。研究结果表明,在四边固定情况下,中间挠度最大为37.77 cm;三边固定一边自由情况下,自由边中间挠度最大,为46.22 cm。该模型计算结果与现场监测数据大致吻合。

    Abstract:

    Based on the theory of elasticity, thin plate small deflection theory and mathematical calculation, the top plate deflection equation was constructed using the Burgers body, and the relationship between the deflection and time under different boundary conditions of the mining area top plate was studied. The research results show that under the condition of four sides fixed, the maximum middle deflection is 37.77 cm, and under the condition of three sides fixed and one side free, the maximum mid-dle deflection of the free side is 46.22 cm. The calculated results of the model are roughly consistent with the field monitoring data.

    参考文献
    相似文献
    引证文献
引用本文

李伟华,韩现刚.基于Burgers体模型的采空区顶板沉降特性研究[J].河北工程大学自然版,2025,42(1):43-49

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-04-05
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-03-07
  • 出版日期: 2025-02-25
文章二维码