• 首 页期刊简介编 委 会规章制度作者指南审稿流程联系我们
期刊封面
殷达,孟庆祥.基于计算均匀化的夹杂颗粒复合材料参数研究[J].河北工程大学自然版,2019,36(2):33-37
基于计算均匀化的夹杂颗粒复合材料参数研究
Computational homogenization based parameter analysis on composites material with inclusion particles
投稿时间:2018-11-25  
DOI:10.3969/j.issn.1673-9469.2019.02.008
中文关键词:  计算均匀化  周期边界条件  复合材料  参数分析
英文关键词:calculating homogenization  periodic boundary condition  composite material  parameter analysis
基金项目:国家自然科学基金资助项目(51709089)
作者单位
殷达 河海大学 岩土工程科学研究所, 江苏 南京 210098 
孟庆祥 河海大学 岩土工程科学研究所, 江苏 南京 210098
河海大学 岩土力学与堤坝工程教育部重点实验室, 江苏 南京 210098 
摘要点击次数: 41
全文下载次数: 24
中文摘要:
      夹杂颗粒复合材料分布形态各异,为确定其力学参数,基于计算均匀化方法,结合随机周期复合材料模型生成算法,提出了一种由表征单元体计算夹杂颗粒复合材料弹性模量的方法,研究了夹杂颗粒分布形态、尺寸和含量对复合材料力学参数的影响。复合材料在颗粒随机分布时表现为各向同性,在颗粒沿一定方向分布时表现为各向异性;复合材料力学参数随单元体尺寸增大逐渐稳定;弹性模量随颗粒含量增加而增大,泊松比随颗粒含量增加而减小。结果表明计算均匀化是研究复合材料力学参数的有效方法。
英文摘要:
      The mechanical parameters of composite materials with inclusion particles are important in engineering. Based on the computational homogenization method and the random periodic composite material model generation algorithm, a method was proposed to calculate the elastic modulus of the composite material with inclusion particles from representative elementary volume, and the influence of the distribution, size and content of the inclusion particles on the mechanical parameters of the composite material was studied. The composites show isotropy when the particles are randomly distributed and anisotropy when the particles are distributed along a certain direction. The mechanical parameters of composites become stable with the increase of element size. The elastic modulus increases with the increase of particle content, and poisson's ratio decreases with the increase of particle content. The results show that the calculation of homogenization is an effective method to study the mechanical parameters of composite materials.
  查看/发表评论  下载PDF阅读器  下载全文
关闭