• 首 页期刊简介编 委 会规章制度作者指南审稿流程联系我们
期刊封面
赫巍巍,关立文,李大奇.基于S试件的AC双转台五轴数控机床加工精度检测联合仿真[J].河北工程大学自然版,2019,36(3):95-100
基于S试件的AC双转台五轴数控机床加工精度检测联合仿真
Co-simulation for Machining Accuracy Detection of Five-axis CNC Machine with AC Dual Rotary Table Based on the S-shaped Test Piece
投稿时间:2019-04-03  
DOI:10.3969/j.issn.1673-9469.2019.03.018
中文关键词:  S试件  Adams  AC双转台五轴联动数控机床  Simulink  机电耦合
英文关键词:S-shaped test piece  Adams  five-axis CNC machine with AC dual rotary table  Simulink  electromechanical coupling
基金项目:东北石油大学引导性创新基金资助项目(2017YDL-03);国家科技重大专项(2014ZX04014-031)
作者单位
赫巍巍 东北石油大学 机械科学与工程学院, 黑龙江 大庆 163318
吉林大学 机械与航空航天工程学院, 吉林 长春 130022 
关立文 清华大学 机械工程系, 北京 100084 
李大奇 东北石油大学 机械科学与工程学院, 黑龙江 大庆 163318 
摘要点击次数: 42
全文下载次数: 27
中文摘要:
      为了深入研究高档数控机床的加工精度检测机理,利用Adams和Matlab/Simulink软件平台对AC双转台五轴联动数控机床加工S试件的运动过程进行联合仿真。首先搭建了机床的机械系统和控制系统模型,然后将整机机械模型的6个输入变量和12个输出变量通过Adams/Control模块分别与Simulink建立的控制模型进行对接,完成系统输入、输出的设置,从而实现整机机电耦合的联合仿真。仿真结果表明五轴机床在加工S试件过程中各个轴的运动都呈非线性变化,与工程实际经验相符。
英文摘要:
      In order to deeply study the mechanism of machining accuracy detection for high-grade CNC machine tools,in this paper,Adams and Matlab/Simulink software was used to simulate the movement of S-shaped test piece produced by five-axis CNC machine with AC dual rotary table.Firstly,the mechanical system and control system model of the machine tool were built.Then the 6 input variables and 12 output variables of the mechanical model were docked with the control model established by Simulink through Adams/Control module respectively,and the settings of input and output in the system were completed,and the co-simulation of electromechanical coupling was realized.The simulation results show that the motion of each axis for the five-axis machine tool presents a non-linear change in the machining S-shaped test piece process,which is consistent with the actual engineering experience.
  查看/发表评论  下载PDF阅读器  下载全文
关闭