多孔碳材料的制备及其在锂离子电池中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG333.17

基金项目:

河北省人才工程培养经费资助科研项目(A201803003);河北省自然科学基金资助项目(B2019402082);邯郸市科学技术研究与发展计划项目(19422111008-16)


Preparation of Porous Carbon Material and Its Application in Lithium Ion Battery
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用溶剂热法,将前驱体ZIF-8通过高温在氮气保护的气氛下进行碳化,得到高比表面积的多孔碳材料。通过X射线衍射仪分析材料的物相,比表面积分析仪检测材料的比表面积和吸脱附情况,用扫描电镜来观察材料的微观形貌;最后,对多孔碳材料在锂离子电池中的电化学性能进行了测试,0.1C条件下测得的比容量为284.61 mAh/g,且循环性能较好,循环效率在95%以上,表明所制得的多孔碳材料具有良好的储锂性能。

    Abstract:

    As an excellent energy storage device, lithium ion battery has been developed rapidly in recent years, and more and more materials have been applied to lithium ion battery. In this study, porous carbon material has been successfully synthesized by carbonization of ZIF-8 in the atmosphere protected by nitrogen. We analyzed the phase purity of the material by XRD, the pores size distribution and specific surface area were analyzed by nitrogen sorption isotherm techniques. At last, the electrochemical properties of porous carbon material in lithium-ion batteries were investigated. the Results show that the specific capacity measured at 0.1C is 284.61mAh/g with good cycling performance, and the cycling efficiency is more than 95%, which indicates that the obtained carbon material shows remarkable lithium storage performance.

    参考文献
    相似文献
    引证文献
引用本文

郭增彩,彭辰波,母静波,刘宏基,赵远向.多孔碳材料的制备及其在锂离子电池中的应用[J].河北工程大学自然版,2021,38(2):99-103

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-03-17
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-06-30
  • 出版日期: